Press and release the StopResetResumeCancel button 4 times, then press and hold the StopResetResumeCancel button 1 time, then release both at the same time (StopResetResumeCancel, and StartPowerOnOff) Note: If the light stops blinking and turns green, the printer is in Service Mode.The tool used for printer maintenance is called the Maintenance Tool, while the tool used for printer repair is called the Service Tool.
The Maintenance Tool is installed automatically when installing the printer driver. The menu provided by the Maintenance Tool include: Cleaning, Deep cleaning, Bottom plate cleaning, Roller cleaning, Print head alignment, Nozzle check, etc. To open the Maintenance Tool: press START, Devices and Printers, right-click the printer, select Printing preferences, select the Maintenance tab. Service Tool is a tool used to reset the printer, after replacing printer components, such as: Logic Board Assy, Waste Ink Absorber, Print Head, etc. When repairing Canon printers, the component is replaced, after the components are installed, the printer must be reset to adjust the new components installed. The menus provided by the Service Tool include: Test print, EEPROM, Nozzle check, EEPROM Save, Set Destination, Clear ink counter, Ink absorber counter, etc. Canon Service Tool V5204 Manual Reset AndTo reset the printer Canon can be done in two ways, namely manual reset and Service Tool reset. ![]() As in the case of the error Waste ink absorber is full, this error occurs because the ink absorber is full, with the waste ink counter value reaching 100. In the process of repairing, the waste ink absorber that is physically full, must be replaced with a new one. After the new waste ink absorber is installed, and the printer has been reassembled, the next step is to reset the waste ink counter, which was originally 100 reset to zero, using the Service Tool. In the case of a Waste ink absorber is full error, the use of a Service Tool that is not accompanied by replacing the Waste ink absorber will be ineffective. This is due, absorbent waste ink that is full, is forced to continue to collect waste ink, and it is very possible in the future that waste ink will overflow out of the printer. Service Tool can be used for several types of printers, and when the Service Tool does not support the printer, an error will appear as a sign that the Service Tool does not support the printer. Service Tool is a portable application and can be used without being installed. As for the way to enter Service Mode, you must press the StopResetResumeCancel button (adjust your printer, what buttons are available), and the StartPowerOnOff button (adjust your printer, what buttons are available) automatically alternating in a certain amount. To enter Service Mode, each printer has a different way, but the steps are almost the same. ![]() The power cable is connected, the USB cable is connected to the printer and PCLaptop, and the printer is off. Press and hold the StopResetResumeCancel button (adjust your printer, what buttons are available) 3. Press and hold the StartPowerOnOff button (customize your printer, what buttons are available). Release the StopResetResumeCancel button. For the StartPowerOnOff button still on hold (dont release) 5. Canon Service Tool V5204 How To Do StepPress the StopResetResumeCancel button x times, then release the StartPowerOnOff button (read; how to do step 5.) 6. After the printer is in Service Mode, open the Canon Service Tool. How to do step 5. Example: the printer being repaired is Canon MG2100, and the x value is 5 times.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |